Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
HLG-80H-C700AB is the model of this series: rated current 700mA, rated power 90.3W, typical efficiency 91.5%.
HLG-80H-C series is a 90W AC/DC LED driver featuring the constant current mode and high voltage output. HLG-80H-C operates from 90~305VAC and offers models with different rated current ranging between 350mA and 700mA. Thanks to the high efficiency up to 91.5%, with the fanless design, the entire series is able to operate for -40℃ ~ +80℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-80H-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Features
- Constant current mode output
- Metal housing with ClassⅠdesign
- Built-in active PFC function
- IP67 / IP65 design for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming
- Typical lifetime>62000 hours
- 7 years warranty
Specifications
OUTPUT
- RATED CURRENT
- 700mA
- RATED POWER
- 90.3W
- CONSTANT CURRENT REGIONNote.2
- A-Type : 64V ~ 129V B-Type : 84V ~ 129V
- CURRENT ADJ. RANGE
- 420 ~ 700mA
- CURRENT RIPPLE
- 8.0% max. @rated current
- CURRENT TOLERANCE
- ±5%
- SET UP TIMENote.4
- 500ms/115VAC, 230VAC
INPUT
- VOLTAGE RANGENote.3
- 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
- FREQUENCY RANGE
- 47 ~ 63Hz
- POWER FACTOR (Typ.)
- PF≧0.98/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
- TOTAL HARMONIC DISTORTION
- THD< 20% (@ load≧60% /115VAC, 230VAC; @ load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
- EFFICIENCY (Typ.)
- 91.5%
- AC CURRENT (Typ.)
- 0.88A / 115VAC 0.45A / 230VAC 0.38A / 277VAC
- INRUSH CURRENT(Typ.)
- COLD START 60A(twidth=410μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
- MAX. No. of PSUs on 16A CIRCUIT BREAKER
- 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
- LEAKAGE CURRENT
- <0.75mA / 277VAC
PROTECTION
- SHORT CIRCUIT
- Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 150 ~ 170V Shut down o/p voltage with auto-recovery or re-power on to recovery
- OVER TEMPERATURE
- Shut down o/p voltage, re-power on to recover
ENVIRONMENT
- WORKING TEMP.
- Tcase=-40 ~ +80℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)
- MAX. CASE TEMP.
- Tcase=+80℃
- WORKING HUMIDITY
- 10 ~ 95% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +80℃, 10 ~ 95% RH
- TEMP. COEFFICIENT
- ±0.03%/℃ (0 ~ 50℃)
- VIBRATION
- 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDSNote.6
- UL8750, CSA C22.2 No. 250.0-08, BS EN/EN/AS/NZS 61347-1,BS EN/EN/AS/NZS 61347-2-13 independent,GB/T19510.1, GB/T19510.213,EAC TP TC 004,IP65 or IP67 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
- ISOLATION RESISTANCE
- I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
- EMC EMISSIONNote.6
- Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧50%) ; BS EN/EN61000-3-3,GB/T 17743 , GB17625.1, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, heavy industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
OTHERS
- MTBF
- 3098.6K hrs min. Telcordia SR-332 (Bellcore) ; 309.8K hrs min. MIL-HDBK-217F (25℃)
- DIMENSION
- 195.6*61.5*38.8 mm (L*W*H)
- PACKING
- 0.84Kg; 16pcs/14.4Kg/0.54CUFT
Test conditions and notes10
- 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
- 2. Please refer to "DRIVING METHODS OF LED MODULE".
- 3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
- 4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
- 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 6. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
- 7. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.
- 8. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
- 9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- 10. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Technical drawings
Typical applications
- LED street lighting
- LED fishing lamp
- LED harbor lighting
- LED building architectural lighting
- LED greenhouse lighting
- LED bay lighting
Downloads
Certificates5
Test reports1
Catalogues1
FAQ
Can I use the HLG-80H-C700AB to power dimmable LED downlights?
Yes. The HLG-80H-C700AB provides 700mA constant current at up to 90.3W and 129V (the sheet lists 64-129V for A-Type and 84-129V for B-Type, so keep the load within 84-129V), making it a strong fit for LED downlights within that voltage window. The AB variant includes both a potentiometer for output trimming and a dimming input, so you can adjust brightness from an external 1-10V or PWM controller.
Is the HLG-80H-C700AB suitable for dimmable LED signage?
Yes. At 700mA constant current and 90.3W, it can drive LED signage modules whose series voltage falls between 84V and 129V. The dimming input lets you schedule brightness levels for day and night operation, and the potentiometer provides a fixed trim for the maximum output.
Can the HLG-80H-C700AB drive an LED array with variable brightness control?
Yes. This driver delivers 700mA constant current at up to 129V and 90.3W. The AB suffix provides both adjustable output via potentiometer and 3-in-1 dimming (1-10V, PWM, resistance), giving you full control over light output for applications like display lighting or adjustable work lights.
What dimming options does the HLG-80H-C700AB offer compared to the C700A and C700B?
The HLG-80H-C700AB combines a built-in potentiometer for output current adjustment with a 3-in-1 dimming input (1-10V, PWM, resistance). The C700A has only the potentiometer without dimming. The C700B has only the dimming input without the potentiometer. All three share the same 90.3W, 700mA output and the series' IP65/IP67 approval; the CC region is 64-129V for the A-Type and 84-129V for the B-Type.
How many LEDs can the HLG-80H-C700AB support in a series string?
The number of LEDs depends on each LED's forward voltage. This driver operates at 700mA constant current with a maximum power of 90.3W; the sheet lists a CC region of 64-129V for A-Type and 84-129V for B-Type without listing AB separately. Configure your LEDs in series and ensure the total forward voltage stays within 84-129V.
Can the HLG-80H-C700AB be used outdoors in a sheltered location?
Yes. The series is IP65/IP67 approved, and a waterproof connector can be fitted to the cables for outdoor use, making it appropriate for covered outdoor areas like parking canopies, building overhangs, and covered walkways. It is rated for a case temperature (Tcase) of -40°C to +80°C, with load derating at high temperatures.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.












